Achievements
FACULTY ACHIEVEMENTS
- N. S. Wakchaure, Assistant Professor completed NPTEL Certification with ELITE + Silver Certification and 2% Topper in "Engineering Metrology" Subject.
- N. S. Wakchaure, Assistant Professor completed LaTeX101x: LaTeX for Students, Engineers, and Scientists Course is offered by IITBombayX, an online learning initiative of Indian Institute of Technology Bombay.
- Dr. K.N. Nandurkar, Principal and Professor, Elected as Chairman, Board of Studies (Production and Industrial Engineering SPPU, Pune and is also a Chairman of IIPE (Nashik Local Chapter)
- Dr. K.N. Nandurkar, Principal and Professor, Received an award of Excellence in Institutional Leadership, by ISTE, Mahharashtra GOA section (2018)
- Dr. K.N.Nandurkar, Principal and Professor, reeived an award of best Principal of the year by CSI Mumbai TECHNEXT India 2018
- Dr. K.N.Nandurkar, Principal and Professor received an Engineering Achievemennt Award, IS (I). Nashik Chapter,(2014)
- Dr. P. J. Pawar, HOD and Professor, Published a book entitiled " Evolutionary Computations for Manufacturin" by Stedium press, USA
- Dr. P. J. Pawar, HOD and Professor Elected as Member, Board of Studies (Production and Industrial Engineering).
- Dr. S. R. Gangurde, Professor, Member of board of directors IET (I) Nashik Local Chapter
- Dr. N.B.Gurule, Associate Professor, received an award of best NSS Programme officer by SPPU, Pune
2.jpg){kind=link}
|
Institute/ organization of repute where our faculty deliver expert talk
|
 |
 |
 |
 |
 |
|---|
- Courses Completed by faculty during COVID-19 Period
- Courses Completed by students during COVID-19 Lockdown Period
-
NPTEL Course Completed AY 2019-20 Sem-I
|
|
Publication in International Journal |
|||||||
|
|
A.Y. 2018 – 2019 |
|||||||
|
|
Name of Faculty |
Paper Details |
DOI No. / ISSN |
|||||
|
|
Prof (Dr.) P.J. Pawar |
Sequence Optimization of Hole Making Operations for Injection Mould using Shuffled Frog Leaping Algorithm with Modification, Management and Production Engineering Review, Vol. 9(3), pp. 71-78. |
DOI: 10.24425/119536 |
|||||
|
|
Prof (Dr.) P.J. Pawar |
Joshi, A.S., Deshpande, V.S. and Pawar, P.J. (2019) Evaluating the effect of organizational practices on work effectiveness of employees, International Journal of Management Concepts and Philosophy, Vol. 12, No. 2, pp. 133-149 |
DOI: 10.1504/IJMCP.2019.099320 |
|||||
|
|
Prof.V.S. Gaikwad |
Optimization of material removal rate during electrical discharge machining of cryo-treated NiTi alloys using Taguchi’s method, vol. 30 ,266-272 |
DOI:10.1016/j.jksues.2016.04.003 |
|||||
|
|
A.Y. 2017 – 2018 |
|||||||
|
|
Name of Faculty |
Paper Details |
DOI No. / ISSN |
|||||
|
|
Prof. (Dr.) P. J. Pawar |
An application of TOPSIS for selection of appropriate e-Governance practices to improve customer satisfaction, Journal of Project Management, Vol. 2, pp. 93-106. |
DOI: 10.5267/j.jpm.2017.7.002 |
|||||
|
|
Improving the quality characteristics of abrasive water jet machining of marble material using multi-objective artificial bee colony algorithm, Journal of Computational Design and Engineering, Vol. 5 (3), pp.319-328 (Elsevier) |
DOI: 10.1016/j.jcde.2017.12.002 |
||||||
|
|
Material Flow Optimization of Production Planning and Scheduling Problem in Flexible Manufacturing System by Real Coded Genetic Algorithm (RCGA), Flexible Services and Manufacturing Journal, Available online, In-Press (Springer) |
DOI: 10.1007/s10696-018-9310-5 |
||||||
|
|
Prof. (Dr.) S.R. Gangurde |
“Benchmark Product Features using Kano - QFD approach: a Case Study”, Benchmarking: An International journal, Vol. 25, No. 2, pp.450 - 470, 2018. |
DOI 10.1108/BIJ-08-2016-0131(ISSN: 1463 - 5771). |
|||||
|
|
Prof. M.Y. Khalkar |
Improving the quality characteristics of abrasive water jet machining of marble material using multi-objective artificial bee colony algorithm, Journal of Computational Design and Engineering, Vol. 5 (3), pp.319-328 (Elsevier) |
DOI: 10.1016/j.jcde.2017.12.002
|
|||||
|
|
A.Y. 2016 – 2017 |
|||||||
|
|
Name of Faculty |
Paper Details |
DOI No. / ISSN |
|||||
|
|
Prof. (Dr.) K.N. Nandurkar |
Dynamic machine layout for press tool operations using real coded genetic algorithm, International Journal of metaheuritics, Nov.2016 (Publisher: Inderscience) |
||||||
|
|
Prof (Dr.) P.J. Pawar |
Dynamic machine layout for press tool operations using real coded genetic algorithm, International Journal of metaheuritics, Nov.2016 (Publisher: Inderscience) |
||||||
|
|
Tool path planning of hole-making operations in ejector plate of injection mould using modified shuffled frog leaping algorithm”, Journal of Computational Design and Engineering, Vol. 3 (3), pp. 266–273 (Publisher: Elsevier) |
DOI: 10.1016/j.jcde.2016.04.001 |
||||||
|
|
Parametric optimization of abrasive water jet machining of glass fibre reinforced plastic composite using non-dominated sorting genetic algorithm-II, International Journal of Metaheuristics’, Vol.6 (4), pp. 334-354 (Publisher: Inderscience, USA) |
DOI: 10.1504/IJMHEUR.2017.10006782 |
||||||
|
|
Identification of factors influencing the performance of government organization’s and undertakings in India using analytic hierarchy process’, International Journal of Services Sciences, Vol. 6, No. 2, pp.162–176.. |
DOI: 10.1504/IJSSCI.2017.088754 |
||||||
|
|
Publication in National Journal |
|||||||
|
|
A.Y. 2018 – 2019 |
|||||||
|
|
Name of Faculty |
Paper Details |
DOI No. / ISSN |
|||||
|
|
-- |
-- |
-- |
|||||
|
|
A.Y. 2017 – 2018 |
|||||||
|
|
Name of Faculty |
Paper Details |
DOI No. / ISSN |
|||||
|
|
Prof. (Dr.) K.N. Nandurkar |
Manufacturing excellence for Sustainability: Indian scenario” published in Annual Technical Volume of Production Engineering Division Board of IE (I), Volume2, 2017, pp. 27-34 |
|
|||||
|
|
Prof. (Dr.) P. J. Pawar |
Manufacturing excellence for Sustainability: Indian scenario” published in Annual Technical Volume of Production Engineering Division Board of IE (I), Volume2, 2017, pp. 27-34 |
-- |
|||||
|
Publication in International Conference |
||||||||
|
A.Y. 2018 – 2019 |
||||||||
|
Name of Faculty |
Paper Details |
DOI/ISSN |
||||||
|
Dr. K.N. Nandurkar |
“Developing IT Enabled Mechanism for SWOC Analysis: A Case Study” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
“Research on the Application of Internet of Things (IoT) Technology towards World-Class Manufacturing (WCM) Industry” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof. (Dr.) P. J. Pawar |
“Multi-Objective Optimization Of Wire Electric Discharge Machining Process Using Artificial Bee Colony Algorithm”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
||||||
|
“Optimization Of Magnetic Abrasive Finishing Process Using Principal Component Analysis”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
|||||||
|
“Multi-Response Optimization Of Burnishing Of Friction Welded Aa6082-T6 Using Principal Component Analysis”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
|||||||
|
“Integrated Production Planning And Scheduling For Parallel Production Lines”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
|||||||
|
“Performance Evaluation of Fuzzy Modelling Approach for Advance Manufacturing Processes” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
“Selection of Most Efficient Maintenance Strategy Using MADM Techniques” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
“Material Flow Optimisation for Multistage, Multiproduct Parallel Lines by Real Coded Genetic Algorithm (RCGA)” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
“Multi-response Optimization of Burnishing of Friction Welded AA6082-T6 using Taguchi, Gray Relation Analysis and Principle Component Analysis” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
“Path optimization for redundant manipulator to Travelling Salesman Problem (TSP)” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof. (Dr.) S.R. Gangurde |
“Petro-forge Forming: A Review” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
“Selection of Most Efficient Maintenance Strategy Using MADM Techniques” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Ranking of Electroplating Methods using grey relational analysis, “2nd International Conference on Advanced Technologies for Societal Applications”, 14-15 Dec. 2018(Organizer:SVERICOE,Pandharpur) |
|
|||||||
|
Prof. (Dr.) N.B. Gurule |
“Optimization of Process Parameters of CO2 MIG Welding Process for ST42 Using Taguchi and GRA Technique”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
“Multi Response Optimisation of Ring Gear Hobbing Parameters by Taguchi Method and PCA Based GRA Method”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof. S.B. Gunjal |
“Optimization Of Magnetic Abrasive Finishing Process Using Principal Component Analysis”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
||||||
|
“Optimization of Cutting Parameters during Hard Turning Operation of SS304 Material for Maximizing Tool Life and Minimizing Production Time” International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof. A.A. Sonawane |
“Design and Fabrication of Artillery Targeting Robot”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
“Optimisation of Parameters of Moulding Sand Using Taguchi Methodology and Grey Relation Analysis”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof. M.Y. Khalkar |
“Multi-Objective Optimization Of Wire Electric Discharge Machining Process Using Artificial Bee Colony Algorithm”, International Conference on “Advanced Engineering Optimization Through Intelligent Techniques, 3-5 Aug. 2018 (Organizer: SVNIT Surat) |
|
||||||
|
“Selection of Optimal Cooling System Parameters used in Industrial Controller Cabinet - Crow Search Algorithm”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
|||||||
|
Prof.V.S. Gaikwad |
Multi-objective Optimization of Electrical Discharge Machining Process during Machining of NiTi Alloy using Taguchi and Utility Concept, “2nd International Conference on Advanced Technologies for Societal Applications”,14-15 Dec. 2018 (Organizer:SVERICOE,Pandharpur) |
|
||||||
|
Prof. A.D. Mandlik |
“Determinants of Using Project Management in the Implementations of Management Information Systems Review”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
Prof. S.B. Sangle |
“Friction Stir Welding: The Review”. International conference on manufacturing excellence, 15-16, Feb. 2019 (Organizer: K.K.W.I.E.E.R., Nashik) |
|
||||||
|
A.Y. 2017 – 2018 |
||||||||
|
Name of Faculty |
Paper Details |
DOI/ISSN |
||||||
|
Prof. (Dr.) K. N. Nandurkar |
Proposed model of Entrepreneurship Development Cell at KKWIEER, Nashik” presented at 48th Annual meeting of DSI: Innovative decision making-Research to Practice, Washington Hilton, Washington DC, USA during November 18-20, 2017 |
|
||||||
|
Dr. P.J Pawar |
“Optimization of Single Supplier Multi Buyer Multi Product Supply Chain System”, 46th SME North American Manufacturing Research Conference, NAMRC 46, Texas, USA, 18-22 June, 2018, (Organizer: Texas A&M University, USA) |
|
||||||
|
Dr. S. R. Gangurde |
“Experimental Investigation and Optimization of wire drawing processes parameter”, International Conference on Manufacturing and Industrial Engineering, pp.56, 14-16 Sep. 2017. (Organizer: Indian Institution Industrial Engineering and MGM’s Jawaharlal Nehru Engineering College, Aurangabad.) |
|
||||||
|
“Selection of Welding Processes to weld mild steel using technique for order preference by similarity to ideal solution method”, International Conference on Manufacturing and Industrial Engineering, pp.54, 14-16 Sep. 2017. (Organizer: Indian Institution Industrial Engineering and MGM’s Jawaharlal Nehru Engineering College, Aurangabad.) |
|
|||||||
|
“Extrusion die material selection using Graph Theory and Matrix Approach”, International Conference on Manufacturing and Industrial Engineering, pp.47-48, 14-16 Sep. 2017. (Organizer: Indian Institution Industrial Engineering and MGM’s Jawaharlal Nehru Engineering College, Aurangabad.) |
|
|||||||
|
Prof. N.S. Wakchaure |
“Performance Analysis of spiral and Conical Receivers for the Paraboloidal Dish Collector Using CFD”, International Conference on Advances in Energy Research ICAER 2017 IIT Bombay, 12-14 December 2017. |
|
||||||
|
A.Y. 2016 – 2017 |
||||||||
|
Name of Faculty |
Paper Details |
DOI/ISSN |
||||||
|
Dr. K.N. Nandurkar |
Multi Response Optimization of Powder Mixed EDM process parameters by Grey Relational Analysis, Proceedings of the International Conference on Modern Era Research in Mechanical Engineering (MERME-16), September28-30, 2016, RIT, Islampur, India, pp. 439-447 |
|
||||||
|
Multi Response Optimization of Ring gear Hobbing Parameters by Taguchi Method and Grey Relational Analysis, Proceedings of the International Conference on Modern Era Research in Mechanical Engineering (MERME-16), September28-30, 2016, RIT, Islampur, India, pp.162-167 |
|
|||||||
|
Structural Equation Modelling of a Conjoint Implementation of JIT, TQM, TPM, SCM and ERP’ Proceedings of the 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, INDIA |
|
|||||||
|
Performance improvement in sinking Electric Discharge machining using powder mixed dielectric, published in the Proceedings of The International Conference on Manufacturing Excellence (ICMAX 2017), organized by KKWIEER, Nashik, India during March 3-4, 2017, pp. 151-157 |
ISBN:978-93-24457-41-5 |
|||||||
|
Predicting production quantity by integrating Monte Carlo Simulation and Regression analysis”, published in the Proceedings of The International Conference on Manufacturing Excellence (ICMAX 2017), organized by KKWIEER, Nashik, India during March 3-4, 2017, pp. 498-503. |
ISBN:978-93-24457-41-5 |
|||||||
|
Multi-response optimization of Powder Mixed Electric Discharge machining of Cobalt bonded Tungsten Carbide using Grey Relational analysis”, published in the Proceedings of The International Conference on Manufacturing Excellence (ICMAX 2017), organized by KKWIEER, Nashik, India during March 3-4, 2017, pp. 537-542 |
ISBN:978-93-24457-41-5 |
|||||||
|
Minimisation of Geometrical errors in CNC turning process using ROVOP method” published in the Proceedings of The International Conference on Manufacturing Excellence (ICMAX 2017), organized by KKWIEER, Nashik, India during March 3-4, 2017, pp. 593-599 |
ISBN:978-93-24457-41-5 |
|||||||
|
Prof. (Dr.) P. J. Pawar |
“Material flow optimization of flexible manufacturing system using real coded Genetic Algorithm (RCGA)” , Advanced & Agile Manufacturing Agile Software Development (ICAM-ASD), 6-7 Oct. 2016(Organizer: SGGS Institute of Engineering & Technology Nanded) |
|
||||||
|
“Application of AHP for Process Parameter Selection and Consistency Verification in Secondary Steel Manufacturing ”, International Conference on Advances in Materials & Manufacturing, 8-10 Dec. 2016, International Conference on Advances in Materials & Manufacturing . (Organizer: Osmania University & DRDL Hyderabad) |
|
|||||||
|
Plane Magnetic Abrasive Finishing of AISI-304 Stainless Steel, International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Inverse Kinematics Problems in Industrial Robotics: A Review” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Drilling Path Optimization of Holes of Printed Circuit Board using Modified Shuffled Frog Leaping Algorithm” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Experimental Investigation and Optimization of Control Parameters of Cooling System for an Industrial Robot Controller Cabinet” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Optimization of Operation Allocation Problem in Flexible Manufacturing System by Real Coded Genetic Algorithm” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Multi-Response Optimization of Burnishing of Friction Welded Al6082-T6 using Grey Relation Analysis” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Predicting Production Quantity by Integrating Monte Carlo Simulation and Regression Analysis” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Ranking Organization Method for Enrichment Evaluations (PROMETHEE)”International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Analyzing Impact of E-Governance Practices and Standardized Processes on Customer Satisfaction of MHADA using TOPSIS with Reference to Pune and Nashik Board” International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Modeling and Optimization of Wire Electric Discharge Machining”. International Conference on Manufacturing Excellence (3-4 March 2017), (Organizer: K. K. Wagh IEER, In association with SPPU, Pune) |
ISBN:978-93-24457-41-5 |
|||||||
|
Dr. S.R. Gangurde |
“Selection of Welding Electrode using Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE)”, International Conference on Manufacturing Excellence (ICMAX-2017),PP-511-515, (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
||||||
|
“Selection of Wire Drawing Die Material using Graph Theory and Matrix Approach”, International Conference on Manufacturing Excellence (ICMAX-2017),PP-516-523, (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
|||||||
|
“A Study of Process Parameters of Wire Drawing :A Review”, International Conference on Manufacturing Excellence (ICMAX-2017),PP-176-181, (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
|||||||
|
“Shielded Metal Arc Welding Electrode Selection using TOPSIS”, International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2016) [ICCASP/ICMMD-2016. Advances in Intelligent Systems Research. Vol. 137, Pp. 15-20, Published by Atlantis Press] 20-21, Dec. 2016 (Organizer:r.B.R. Ambedkar Technological University, Lonere, Maharashtra. (TEQIP) |
|
|||||||
|
“Drawing of Copper Wire using Stepped Cone wire Drawing Machine: Design and Development”, International Conference on Advanced and Agile manufacturing and Agile software development 6 -7, Oct. 2016 [ICAM-ASD2016 (Organizer: Centre of Excellence In Metal Forming and SGGSIE &T, Nanded. |
], ISBN:978-93-86256-04 -1 |
|||||||
|
“High Speed Forming of Aluminium Sheet using Electromagnetic Forming”, International Conference on Advanced and Agile manufacturing and Agile software development -7, Oct. 2016 [ICAM-ASD2016], (Organizer: Centre of Excellence In Metal Forming and SGGSIE &T, Nanded |
ISBN:978-93-86256-04 -1 |
|||||||
|
Dr. N.B. Gurule |
“Performance Improvements inSinking Electric Discharge Machining using Powder Mixed Dielectric” Proc. of theInternational Conference on Manufacturing Excellence (ICMAX-2017), pp. 172-178. (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
||||||
|
Multi-Response Optimization ofPowder Mix Electrical Discharge Machining of Cobalt bonded Tungsten Carbide Using GreyRelation analysis”, Proc. of the International Conference on Manufacturing Excellence(ICMAX-2017), pp. 558-563. (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
|||||||
|
Fasteners Quality Improvement through DefectsIdentification and Analysis Using Taguchi DOE”, Proc. of the International Conference onManufacturing Excellence (ICMAX-2017), pp. 580-590(Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik ) |
ISBN:978-93-24457-41-5 |
|||||||
|
Optimization of Rotary Tool Powder Mixed Electrical Discharge Machining Parameters for Tungsten Carbide Using Taguchi Technique”, Proceeding of International Conference on Materials, Manufacturing and Design Engineering, Lonere, Raigad, Maharshtra. |
|
|||||||
|
Multi Response Optimization of Powder Mixed EDM Process Parameters by Grey Relational Analysis” Proceeding of International conference on Modern Era Research in Mechanical Engineering, RIT, Islampur, Sagali, Maharashtra, pp. 439-447. |
|
|||||||
|
Prof. S.B. Gunjal |
“Plane Magnetic Abrasive Finishing of AISI-304 Stainless Steel”, Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik) |
ISBN:978-93-24457-41-5 |
||||||
|
Prof. A.B. Bhusnar |
“Modeling and Optimization of Wire Electric Discharge Machining”Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik)3rd and 4th March 2017. |
ISBN:978-93-24457-41-5 |
||||||
|
Prof. M.Y. Khalkar |
“Effect of cry treated Ni-Ti alloysand copper electrode on Electric Discharge machining performance measure”Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik)3rd and 4th March 2017. |
ISBN:978-93-24457-41-5 |
||||||
|
Prof. V.S. Gaikwad |
“Effect of cry treated Ni-Ti alloysand copper electrode on Electric Discharge machining performance measure”Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik)3rd and 4th March 2017. |
ISBN:978-93-24457-41-5 |
||||||
|
Prof. S.D. Ray |
“Modeling and Parametric Optimization of Electrochemical Machining (ECM) Of EN-31 Alloy Steel”,Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
||||||
|
“Selection of Wire Drawing Die Material using Graph Theory and Matrix Approach”,Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
|||||||
|
Prof. A.D. Mandlik |
“Process Evaluation for Improving Efficiency And Utilization of Production Line of milk industry- A case study” Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik)3rd and 4th March 2017. |
ISBN:978-93-24457-41-5 |
||||||
|
“Modelling & parametric optimization of ECM of EN 31 alloy steel” Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, Nasik)3rd and 4th March 2017. |
ISBN:978-93-24457-41-5 |
|||||||
|
Prof. N.S. Wakchaure |
“Warehouse Management System: Case Study of an Automobile Plant”, Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
||||||
|
“Process Evaluation for Improving Efficiency and Utilization of Production Line in Milk Industry: Case Study”, Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
|||||||
|
“Performance Analysis of Solar Absorber for Different Absorber Coating Materials”, Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
|||||||
|
Prof. S.B. Sangale |
“Warehouse Management System: Case Study of a Automobile Plant”, Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
||||||
|
“Modeling and Parametric Optimization of Electrochemical Machining (ECM) Of EN-31 Alloy Steel”,Proc. of the International Conference on manufacturing Excellence (ICMAX-2017), (Organizer: Department of Production Engineering, K. K. W.I.E.E.R, |
ISBN:978-93-24457-41-5 |
|||||||
|
Publication in National Conference |
||||||||
|
A.Y. 2018 – 2019 |
||||||||
|
Name of Faculty |
Paper Details |
DOI / ISSN |
||||||
|
N.S. Wakchaure |
Review of E-assessment tools for assessment for/while/of learning |
|
||||||
|
S.B. Sangle |
Review of E-assessment tools for assessment for/while/of learning |
|
||||||
|
A.Y. 2017 – 2018 |
||||||||
|
Name of Faculty |
Paper Details |
DOI / ISSN |
||||||
|
Prof. (Dr.) P. J. Pawar |
“Application of fuzzy rating scale in Industrial Robot selection”, National Conference on Recent trends in Computer Science and applications, 22-23 Dec. 2017, (Organizer: Indira College of commerce & Science. Pune) |
|
||||||
|
Prof. V.S. Gaikwad |
A review on Abrasive Water Jet Machining, National Conference on Recent trends in Manufacturing and Production Engineering, 19-20 December 2017. |
|
||||||
|
A.Y. 2016 – 2017 |
||||||||
|
Name of Faculty |
Paper Details |
|
||||||
|
Dr. P.J. Pawar |
“Parametric Optimization of Cold Backward Extrusion Process using Simulated Annealing”, Recent Trends in Computer Science & Applications & Computational Mathematics, 22-23 Dec. 2016, (Organizer: Indira College of commerce & Science. Pune) |
|
||||||
| S. N. | Title of patent | Faculty | Application ID | Status |
| 1 |
Damage control of steam turbine shaft though implementation of image processing technology for vibration analysis Application No.201821014403 A |
Dr.P. J. Pawar, Prof.N. S. Wakchaure |
TEMP/E-1/14624/2018-MUM The Patent Office Journal No. 19/2018 Dated 11/05/2018 |
Published |
| 2 |
Processes Design of spring for Switch Gear Application Application No.201821014382 A |
Dr.P. J. Pawar Prof.V. S. Gaikwad |
TEMP/E-1/14603/2018-MUM The Patent Office Journal No. 19/2018 Dated 11/05/2018 |
Published |
| 3 |
Cylindrical Magnetic Abrasive Finishing Machine Application No.201821014406 A |
Prof.S. B. Gunjal, Dr.P. J. Pawar |
TEMP/E-1/14628/2018-MUM The Patent Office Journal No. 19/2018 Dated 11/05/2018 |
Published |
- Mr. Sumit Joshi, Student of Third Year Production Engineering (2019-20) Secured Elite+ Silver Certification in "Engineering Metrology" conducted by SWAYAM- NPTEL Examination
- Ms. Darshana Mehta, Student of Third Year Production Engineering (2019-20) Secured Elite Certification in "Engineering Metrology" conducted by SWAYAM- NPTEL Examination
- Mr. Sumit Joshi, Student of Third Year Production Engineering (2019-20) Secured Second Rank in Quiz Competition hed by Austro Club at E&TC Department of KKWIEER. Nashik on 28th Sept.2019.
- Ms. Shwetambary Shimpi , Student of Third Year Production Engineering (2019-20) Secured first Rank (GOLD MEDAL) in Inter college Rifie Shooting Held at CBC College Organized by SPPU, Pune
- Ms. Shwetambary Shimpi , Student of Third Year Production Engineering (2019-20) Secured first Rank 2 GOLD MEDAL and 1 Silver Medal in Open Shooting Championship Representing Maharashtra State organized by National Rifile Association of India
- Mr. Yadnesh Aher (TE Production (2018-19) Student) has completed the National Programme on Technology Enhanced Learning (NPTEL) course with “Elite+Gold ” Grade in Jan- Feb 2019 in the “ Product Design and developement ” course.
- Mr. CHINMAY HEMANT ANDHARE (TE Production 2018-19 Student) has completed the National Programme on Technology Enhanced Learning (NPTEL) course with “Elite+Gold ” Grade in Jan- Feb 2019 in the “ Product Design and developement ” course.
- Mr. Akash Modi in Robotics war competition got second prize held at IIT bombay (2018-19)
- Ms. Pallavi Kadam of TE Production Engineering is felicitated by Mr. C. M. Pandit, General Manager, Atlas Copco for being female topper in Third Year University Examination held in the year 2016-17.
- Mr. Prasad Mahale and Chandrakiran Patil (Student of BE Production) Qualified the GATE 2019 (PI)
- Mr. Ujjwal Mahajan ,Student of TE (Production) received first prize at Technical Quiz competition AMALGAM 2017 organized by IIT Madras in Feb. 2017
- Mr. Swapni Wankhede, Student of BE Production (2017-18) Participated in the SAEINDIA Northern Section EFFI- CYCLE 2018 Team Param. Runner-up for Design Award to the team Param
- Mr. Chndrkiran Patil and Pranav Dhonde, Student of BE Production Engg. (Batch 2017-18), received Best Paper Award in 2nd AIMTDR Organized by dept. of Production Engineering, KKWIEER, Nashik, Paper Title: Design And Development Of Solar Dryer For Agricultural Applications.
- Mr.Sameer fegde, Student of BE Production Engg. (Batch 2017-18), received Best Paper Award in 2nd AIMTDR Organized by dept. of Production Engineering, KKWIEER, Nashik Paper Title: An Efficient Product Development Model By Integrating Kano’s Model Of Customer Satisfaction With QFD.
- Mr. Prasad Mahale, Rajesh Jha and Ms. Komal Palkhade Student of BE Production Engg. (Batch 2017-18), received Best Paper Award in 2nd AIMTDR Organized by dept. of Production Engineering, KKWIEER, Nashik Paper Title: Cycle time reduction in manufacturing of outer tube of suspension front fork of an automobile.
- Mr. Sarvesh Chandratrem Studennt of BE Production (Batch 2017-18) has Secured Second Position and Qualified in the all India inter-University Championship from west zone, held at KIIT University, Bhubaneshwar in Table Tennis (Men)
- Mr. Rohit Hyalij and Team got Appreciation for Social Glance in Karmveer Expo-2017 for Waste Converter Machine.
- Mr. Rahul Sanap, student of BE Production (Batch 2018-19) Winnerup in the Vasant Karandak Sports Competition under the Event of Cricket held at NDMVP KBGTCOE, Nashik (Group) 24th to 28th Feb.2018
- Aniket rane and team developed all time vehicle in AY 2016-17
- Ms. Khushbu Kshirsagar, B.E Production got Academic Excellence Award from Atlas Copco, Nashik AY 2015-16
- Mr. Chirag Agarwal (Production)Topped MBA CET 2014 at all India Level (AIR-I).
- Mr. Prasad Mahale, (Student of BE Production Engg. Batch 2017-18) Secured rank 54 in GATE2019 (Production and Industrial)
- Mr. Mobin Harun Khan (Student of Production Engg.Batch 2016-17) secured Rank 50 in MAH-MBA/MMS-CET 2019
- Mr. Pritish Chandratre ,MD Rhythmsoft Robotics and Autommation Pvt. Ltd. (Student of Production Engineering Department) Received an awarrd of BUSINESS ICONS OF NASHIK in the presence of Chief Minister of Maharashtra, Mr. Devendra Fadanvis on 26th December 2014 in Nashik by Lokmat Group.
- Mr. Ujjwal K. Mahajan, ( Student of Producion Engineering Dept. batch 2017-18) Offered a Graduate Instrustional Assistanceship ( GIA) in the Ingram School of Engineering at Texas State University, USA
